|
flowcoroll + flowcoroll V |
|
|
|
Impregnation system ‚flowcoroll‘ for individual parts
|
Fields of application:Impregnation with non-pigmenting material of individual wood window components or mouldings in lying position
|
The Process:In the coating zone the wooden parts are coated with the aqueous impregnation material supplied by tried and tested low-pressure flow-coat nozzles. The generation of paint mist is avoided. Excessive material on the surface of the workpiece is blown off in a special zone. This way, the workpieces leave the system without any paint drops or runs and a directly following destacking (manual or automatic) is possible. |
|
 |
 |
|
Features:
- large coating nozzles generating low paint mist
- energy-saving control of parts in motion
- Saturation of all coated areas of the workpiece because of multiple-overlapping spraying pattern
- subseqeuent blow-off station to remove excessive paint materia
|
Technical data:Length:
Height (adjustable):
Effective width of rolls:
System width without drive:
Progressively adjustable drive
Recommended operating speed:
Consumption of compressed air: |
|
approx. 1.450 mm
approx. 630 - 870 mm
approx. 200 mm
approx. 650 mm
approx. 3 m/min.
approx. 1.200 Nl./min. |
|
Additional dimensions on demand.
For further information please refer to: 
|
|
|
Impregnation system ‚flowcoroll V‘ for individual parts
The impregnation system ‚flowcoroll V‘ is an alternative of the standard system ‚flowcoroll’. It offers a reinforced blow-off unit using a high-pressure turbine which operates independent of the compressed air network. The drying period of the workpieces is reduced so that an efficient further processing of the parts is made easy.
|
Technical data:Length:
Height:
Effective width of rolls:
Progressively adjustable drive:
Recommended operating speed: |
ca. 3.940 mm
approx. 1.000 mm
approx. 200 mm
2-8 m/min.
approx. 6 m/min. |
 |
| Additional dimensions on demand. |
|
|
|
 "flowcoroll")
 "flowcoroll Düsen")
 "flowcoroll_V")